High-performance flexural fatigue of carbon nanotube yarns

Carbon nanotube yarns （CNTY） possess good specific strength and specific conductivity. As such, their potential for commercial applications is significant. Fatigue performance is a significant consideration in yarn/wire applications. In this study, the flexural fatigue performance of CNTY spun from super-aligned carbon nanotube arrays was investigated using a reversed bending test. The results showed that CNTY exhibited excellent resistance to pure flexural fatigue, significantly outperforming stainless steel wire; CNTY failed where a combination of flexural fatigue and tension-tension fatigue had special hollow fracture morphology, and CNTY resistance remained fundamentally unchanged in the combination fatigue process.     

Graphene meets biology

Graphene features a shining star in the material sciences since its discovery in 2004. Biomedical application of graphene-family materials has been driven recently. In this paper, we overviewed the cutting-edge research in the biomedical application of graphene-based biomaterials, such as bio-sensing and bio-imaging, drug/gene delivery and scaffold for tissue engineering. We emphasized on the effect of graphene substrates on cellular behaviors of adhesion, proliferation~ and differentiation. The develop- ment of three-dimensional scaffolds based on graphene- based nanomaterials and the potential of these constructs in tissue engineering are discussed. The perspectives and challenges are also addressed.     

CD44v6、E-cadherin和ki-67蛋白质与腮腺多形性腺瘤的生物学行为相关性研究

为检测腮腺多形性腺瘤中CD44v6、E-cadherin和ki-67蛋白表达,以探讨其与腮腺多形性腺瘤生物学行为的相关性。应用免疫组织化学SP法染色检测腮腺多形性腺瘤组、多形性腺瘤恶变组和瘤旁非瘤组织组各组间CD44v6、Ecadherin和ki-67蛋白表达。结果显示,(1)CD44v6、E-cadherin和ki-67在腮腺多形性腺瘤组中的阳性表达率分别为100%、96%和73.8%;(2)E-cadherin和ki-67在腮腺多形性腺瘤组、多形性腺瘤恶变组和瘤周非瘤组织间的阳性表达率均有差异,其表达与腮腺多形性腺瘤的浸润转移有关;(3)CD44v6在腮腺多形性腺瘤组与瘤周非瘤组织组,多形性腺瘤恶变组与瘤周非瘤组织组中的表达有统计学差异。由此可知,E-cadherin和ki-67与腮腺多形性腺瘤的生物学行为有关,可作为新的肿瘤标志物,其表达对判断预后有一定的价值。     

地方高校“播音与主持艺术专业热”透视

新世纪以来,伴随着“艺考”的升温,中国高等教育出现了前所未有的“播音与主持艺术专业热”.具体表现在开设高校增多、报考学生数量庞大、专业规模迅速膨胀和专业培训红火等方面.专业门槛相对较低、专业收费相对较高、传媒业的迅猛发展、播音与主持人的明星效应等是导致“播音与主持艺术专业热”的主要原因.只有政府、学校、家长、学生共同面对,才能使“播音与主持艺术专业热”降温,从而回归正常轨道.     

In situ backscattered electron imaging study of the effect of annealing on the deformation behaviors of Ni electroformed from additive-free and saccharin-containing sulfamate solutions

The Ni samples were electroformed from additive-free(AF) and saccharin-containing(SC) sulfamate solutions, respectively. In situ backscattered electron(BSE) imaging, electron backscatter diffraction(EBSD), and electron-probe microanalysis(EPMA) were used to investigate the effect of annealing on the deformation behaviors of the AF and SC samples. The results indicate that columnar grains of the as-deposited AF sample had an approximated average width of 3 μm and an approximated aspect ratio of 8. The average width of columnar grains of the as-deposited SC sample was reduced to approximately 400 nm by the addition of saccharin to the electrolyte. A few very-large grains distributed in the matrix of the SC sample after annealing. No direct evidence indicated that S segregated at the grain boundaries before or after annealing. The average value of the total elongations of the SC samples decreased from 16% to 6% after annealing, whereas that of the AF samples increased from 18% to 50%. The dislocation recovery in grain-boundary areas of the annealed AF sample was reduced, which contributed to the appearance of microvoids at the triple junctions. The incompatibility deformation between very-large grains and fine grains contributed to the brittle fracture behavior of the annealed SC Ni.     

Template/surfactant free and UV light irradiation assisted fabrication of Mn-Co oxides composite nanorings: Structure and synthesis mechanism

A facile, green, cost effective, and template or surfactant free strategy via a two-step route i.e. UV irradiation followed by dissolution-growth for the controlled synthesis of Mn-Co composite nanorings at room temperature was proposed. The nanorings structures and the process were systematically studied via TEM, HRTEM, EDX and XRD. Bir-MnO_2 nanosheets first formed through the direct photolysis of KMnO_4 under UV light irradiation. This was followed by a dissolution-growth process via the dissolution of Bir-MnO_2 nanosheets by the generated H~+ from the redox reaction between the added Co(NO_3)_2 and residual KMnO_4, as well as the accompanied formation of CoOOH, and Mn-Co composite nanorings. It was found that a balance between the dissolution and growth rate was needed. Suitable pH, KMnO_4 presence and the starting nanosheets like Bir-MnO_2 were the key factors for the formation of nanorings. The obtained Mn-Co nanorings/TiO_2 showed enhanced efficiency for the catalytic oxidation of HCHO. Based on the above understandings, it is believed that the developed dissolution-growth method can be adopted for the designing and preparation of other Mn-Co composite nanostructures which can be further applied for environmental pollution remediation.     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

数据驱动的技术创新网络模体分析

针对现有技术体系如何实现定量化的网络化建模和识别技术创新的模式和机理两个主要问题,提出数据驱动的技术创新网络构建方法,挖掘出技术文档的关键字向量,结合向量空间模型实现技术相似度的定量计算,生成技术创新时序网络。讨论了技术创新网络基本结构,分析了技术创新网络的模体类型与特性,并计算了模体重要性剖面以进一步确定其网络特征,得出技术创新具有强合作性且技术创新网络与生物网络以及信号传输网络属于同一个网络超家族的结论。并以技术评论数据为例验证了该方法的有效性。     

具有非倍测度的参数型Marcinkiewicz积分交换子估计

本文证明了由参数型Marcinkiewicz积分Mρ和Lipshitz函数b生成的交换子Mρb的有界性.在M的核函数满足较强的Hrmander条件下,证明了Mρb不仅从Morrey空间Mpq(μ)到RBMO(μ)有界,从Lebesgue空间Ln/β(μ)到空间RBMO(μ)有界,而且从Morrey空间Mpq(μ)到Lipschitz空间Lip(β-np)(μ)有界,这里p=n/β.     

河南省沥青路面再生技术应用与探讨

介绍了公路沥青路面再生技术的总体概况和国内外旧沥青路面再生技术研究、应用现状.结合河南省内典型路段沥青路面再生技术的工程应用实例,对不同路面再生技术的路用性能进行了详细的试验研究分析.通过介绍不同的应用实例,为沥青路面再生工程施工工艺的合理选择提供了有利参考,期望对河南省的沥青路面再生技术的研究、应用和推广提供一定的借鉴作用.